#KIT1R - MLP-110 110V 66 Block Surge Protector
- 66 Block Lightning Protector
- 110V Maximum Voltage (Ethernet)
- Self-Resetting Fuse
Warranty & Terms
- 1 Year Warranty
- 30-Day Money Back Guarantee
- See Full Warranty / Ordering Terms
MLP-110 1 Pair Ethernet 66 Block Lightning Protector
For Ethernet and other data lines up to 110V.
You'll need one Protector for each pair, so you'll want 2 or 4 per Ethernet run depending on speed and PoE.
The MLP-110 protects the equipment when the voltage on the pair rises above 110V. It also opens the line when the current goes over 150ma. When the voltage or current goes back below the threshold, the MLP-110 automatically resets.
If you don't know the voltage on the line (and there is no ring voltage), put a DC volt meter across the pair to determine the voltage that's on the line normally, then choose a protector that has a higher voltage threshold than what you read (by at least a couple of volts).
Our MLP Protectors come in the following thresholds: 14V, 21V, 30V, 56V, 70V, 110V, 123V and 270V.
If you're putting this on a line going to another building (OPX), be sure to put them at BOTH ENDS of the cable leaving the buildings!
See our Maximum Lightning Protection Knowledgebase article for more technical details.